The Best Paper Airplane: How To Make A Paper Airplane

There are many skills fathers should pass on to their children: how to ride a bike, how to skip a stone, and of course, how to make a paper airplane. The three designs below are tried and true (you wouldn’t believe some of the science behind paper airplanes) and are perfect beginner, moderate, and expert level models to play with. They go in order from easiest to hardest, so there’s something for every age level — including adult; don’t act like you’re not going to try these out in the break room. This paper airplane is a warm-up of sorts.

It’s simple, requires few folds, and flies well. It’s just not going to win you any contests or style points. If it’s your kid’s first time making a real paper airplane, this is a good place to start. First you fold the paper in half lengthwise, and then unfold. This initial crease is simply a guideline for the next folds. Fold the top two corners down so they meet the center crease. This is the classic way to start a paper airplane, and probably what you first learned as a kid. Flip the plane over, and fold the corners in again to the center crease. You want the diagonal line coming off the top of the plane (on the left side) to be lined up with the middle (like on the right side).

After both folds are completed. Fold the top point down so that the tip meets the bottom of where the previous folds come together. Fold the entire plane in half, in on itself. This creates the snub nose, which gives the Bulldog Dart its name. Fold the wings down so that you’re making a straight line across from the top of the snub nose. Repeat on the other side. The finished Bulldog Dart. This flies better when thrown at lower speeds. Your tendency is to launch it, but the heavy nose will just fly it into the ground. Give it a softer throw and you’ll have better luck. This is a slightly more advanced paper airplane. There are a few more folds, and it flies a bit better than the above Bulldog Dart. This is the perfect middle ground between simple and complex recreational paper aircraft.

Start the same way you did with the Bulldog. Fold in half lengthwise and then unfold. Again, this center crease is just a guide for future folds. Fold the top corners in so they meet at the center crease. Fold the entire top down so that it resembles an envelope. Make sure you leave a half inch or so at the bottom — you don’t want the top point to evenly meet the bottom edge. Fold the top corners in so they meet at the middle. There should be a small triangle tail hanging out beneath these folds. Fold that small triangle up to hold those previous folds in place. Fold in half, but make you sure you fold it outwards on itself, not inwards. You want the previous triangular fold to be visible on the bottom edge.

Fold the wing down so its edge meets the bottom edge of the airplane. Repeat on the other side. The finished Harrier. It has cool pointed wings and has great stability because of the triangle on the bottom. While there are far more advanced paper airplanes, this one, in my opinion, is the perfect balance of complexity and accessibility for the Average Paper Airplane Joe. It has far more folds than the previous two models, and also flies the best and farthest. Pay attention with this one, folks, and the payoff is well worth it. This one starts a little differently than your average paper airplane.